Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Rod Building


scotty18

Question

I'm thinking about getting it building my own rods. Not because of the cost, but more for the satisfaction of using stuff you built your self. I'm taking a class though community ed. next week. On sunday I stopped at Thorne Bros. and basically got a class there too. Any help would be great. Would anyone recondmend buying the power wrappers first or going the hand wrap route first? Also if I do invest money in buying the good equipment first, after I get the skills needed down, is there a market out there for hand built rods? My thinking is recouping my investment in equipment.

Thanks, Scotty

Link to comment
Share on other sites

25 answers to this question

Recommended Posts

  • 0

Scotty, I have been building rods for 20+ years. As a hobby it can be very gratifying. As a business it would be very difficult to feed a family. Beware though it is very addicting. Starting out, a handwrapper is all you need and will serve you just fine for many years. If it is something you enjoy then maybe investing in better equipment would be the thing to do. If I can help in any way please feel free to get in touch with me and I will do what I can. Enjoy yourself and just have fun doing it. Rod [email protected]

Link to comment
Share on other sites

  • 0

Scotty
I have been building my own rods for quite while now. I 2nd the going with a hand wrapper, at least if you are gonna do it for a hobby. You can even make a couple of simple of stands to lay the rod in and put the thread in a coffee cup and use a book for tension. It is simple and it does work. The one thing you really should try to get ahold of is drying motor, makes doing the finishing much easier, the finish takes several hours to setup and not sag.

You can go to mudhole.com and on the left side click on rodbuilding 101 and it has some instructional stuff in there.

I only do rods for myself and a few family members so I am really just a hobbyist with this but it is fun and Rod is right it can get addicting.

Link to comment
Share on other sites

  • 0

Thanks guys, I have been reading quite a bit on rod building, so I think I have a pretty good idea on what I'm getting into.
I was fine with the idea of starting out with hand wrapping until I walked into Thorne Bros. Big Mistake! The guy building rods that day gave me the "TOUR". After seeing all that equipment I knew 2 things. 1. I want to give rod building a try. 2. I got to get all the best stuff right away!
Then reality set in. I started pricing power equipment. WOW! I think I can do a good job using hand equipment. Now do either of you guys use cork rings? I would like to but I'm a little worryied about shaping the handle. I think I can do it with files and sand paper. I really just want to make rods for me and my family. I really like the feeling you get when you use something you made yourself.

Thanks again. I'm sure I'll have more questions. Scotty

Link to comment
Share on other sites

  • 0

Cork rings work and what you described will work to shape them. But I would suggest using preformed cork handles and maybe modify them with a few extra rings to get exactly what you want. Shaping the hole handle from rings will get to be kinda hard to keep things going straight if you know what I mean.

Link to comment
Share on other sites

  • 0

I agree with upnorth on the cork issue. The only time I use rings is if a customer wants the top of the line cork. High grade flor cork is not available is preformed grips except for fly rod applications. If you are going to use rings a lathe of some fashion is a must to keep everything concentric. Upnorth-shoot me an e-mail with your tel#. I am located in the north also and I like to keep in touch with other builders in the area. Scotty-just have fun. Rod

Link to comment
Share on other sites

  • 0

This thread could be dangerous. I am always looking for new/different/better rods and have always thought why can't I find what I want, maybe I should just make them. BUT where does one start.

I really want a cat rod but am picky. The rod should be 9'6" to 10' with the end 2' very sensitative and lots of backbone for the remainder yet I want it to have good flex. PICKY I know, but.

Link to comment
Share on other sites

  • 0

rmh2o, The class is thru Big Lake Community ed. Tuesday and thursday night next week, at the high school 6:30 to 9:30. Cost was $16 for the class and rod kits start at $45.
Ok another ? Do I need a cork ring clamp if I use pre made handles? What is the proper procidure for using pre made handles?

Thanks,Scotty

Link to comment
Share on other sites

  • 0

No, you don't need a clamp if you use a premade cork grip. Just ream the grip to the necessary size to fit the blank.Rod

Link to comment
Share on other sites

  • 0

I use split grips on a lot of rods I build. When you are only shaping 3 or 4" of cork(or less), its really easy. I use a length of threaded rod and just clamp a drill to my work bench and use drywall saning pads to allow the cork to exit without building up. Pretty cheap and easy to use this type of "lathe". Be sure to save your cork dust. Mix it with a little Flexcoat and fill in your butt hole(on your rod).

I'm not a wood worker, but last year I picked up a few hand turned walnut grips on ebay. They were very similar to Red Barn grips- might have been since I think they went out of business and everything was sold due to a divorce?? The wood grips are heavy, but they look really good!

Good luck!

Link to comment
Share on other sites

  • 0

Canuck, try going to mudhole.com and browse through the rodbuilding 101. That should give you an idea of how it is done. I started this hobby when a guy I worked with gave me a small brochure with a few simple instructions on it. I went out and bought a rod blank and the necessary parts and started trying to do what was in the brochure. That 1st one took forever, but it turned out pretty good, I am still using that rod and that was about 20 years ago.

You can always post ?s here and I am sure you will get answers to your questions.

Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Creators

Canuck, What you described is the action of a drop shot rod. I don't know if you'll find that in a blank with that length.

Link to comment
Share on other sites

  • 0

scotty18 can a person still sign up for the class and who would I contact.I also live near elk river.Thanks

Link to comment
Share on other sites

  • 0

Hi guys, I think I figured about applying the pre made grips. Ok I know how to spline the rod, but when I find the spline, if I were buliding a spinning rod, would I attatch the guides along the spline?
I've been to some websites reading up on this topic, but I think it just confused me more.

Scotty

Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Creators

The spine is the strong side or outside of the arc. For a spinning rod your guides will go on the opposite side of the spine inside the arc.

Link to comment
Share on other sites

  • 0

Where doew one get rod blanks? And what brand rod blanks are available? I would like to get into this also and hope there are some high quality blanks like St. Croix or Fenwick.

------------------
GIT-R-Done!

Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Creators

Coach Dog, Cabelas carries them. Type in rod blanks on any search engine and you'll find every thing you could every want.

Link to comment
Share on other sites

  • 0

Blanks are available from many sources. Just search on rodbuilding and you will find where to go. Fenwick and Shakespeare are not available in blank form but there are many excellent ones that are. St. Croix,Loomis,Rogue, Rainshadow, Tiger Eye,Pac Bay just to name a few. Rod

Link to comment
Share on other sites

  • 0

I'll be at the Big Lake HS tonight for the class hopefully. I can't make up my mind what kind of rod to make. See you guys there.

Link to comment
Share on other sites

  • 0

Corey and rmh, Kinda cool tonight! It's easier than I thought it would be. See ya on thursday.

Scotty

Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Creators

I do have to say something about Rods by Engel.

He builds very high quality rods. He built a Laker Rod for ice fishing with a Roberts wrap. It is one of my prized posessions now.

If you need help or advice, he knows his stuff. If you need a custom rod, he's the guy to go to.

Link to comment
Share on other sites

  • 0

Thanks for the nice plug for my dad, Rick. I'm glad that laker rod meets your specs. I got to wield it in his rod shop before he sent it out to you- pretty cool. I'd imagine you can feel a laker fart near it- very sensitive!

------------------
Scoot

So I got dat goin’ for me… which is nice.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • smurfy
      Looks to me like Leech brought his chair home!!😅😆
    • Brianf.
      I'm not there, so I can't tell exactly what's going on but it looks like a large area of open water developed in the last day with all of the heavy snow on the east side of wake em up Narrows. These two photos are from my Ring Camera facing north towards Niles Point.  You can see what happened with all of snow that fell in the last three days, though the open water could have been wind driven. Hard to say. .  
    • SkunkedAgain
      Black Bay had great ice before but a few spots near rockpiles where there were spots of open water. It looks like the weight of the snow has created a little lake in the middle of the bay.  
    • LakeofthewoodsMN
      On the south end...   Thanks to some cold spring weather, ice fishing continues strong for those still ice fishing.  The bite remains very good.  Most resorts have pulled their fish houses off for the year, however, some still have fish houses out and others are allowing ATV and side by sides.  Check social media or call ahead to your favorite resort for specifics. Reports this week for walleyes and saugers remain excellent.   A nice mix of jumbo perch, pike, eelpout, and an occasional crappie, tullibee or sturgeon being reported by anglers. Jigging one line and using a live minnow on the second line is the way to go.  Green, glow red, pink and gold were good colors this week.     Monster pike are on a tear!  Good number of pike, some reaching over 45 inches long, being caught using tip ups with live suckers or dead bait such as smelt and herring in 8 - 14' of water.   As always, work through a resort or outfitter for ice road conditions.  Safety first always. Fish houses are allowed on the ice through March 31st, the walleye / sauger season goes through April 14th and the pike season never ends. On the Rainy River...  The river is opened up along the Nelson Park boat ramp in Birchdale, the Frontier boat ramp and Vidas boat ramp.  This past week, much of the open water skimmed over with the single digit overnight temps.   Areas of the river have popped open again and with temps getting warmer, things are shaping up for the last stretch through the rest of the spring season, which continues through April 14th.   Very good numbers of walleyes are in the river.  Reports this week, even with fewer anglers, have been good.  When temps warm up and the sun shines, things will fire up again.   Jigs with brightly colored plastics or jigs with a frozen emerald shiner have been the desired bait on the river.  Don't overlook slow trolling crankbaits upstream as well.   Good reports of sturgeon being caught on the river as well.  Sturgeon put the feed bag on in the spring.  The bite has been very good.  Most are using a sturgeon rig with a circle hook loaded with crawlers or crawlers / frozen emerald shiners. Up at the NW Angle...  Ice fishing is winding down up at the Angle.  Walleyes, saugers, and a number of various species in the mix again this week.  The bite is still very good with good numbers of fish.  The one two punch of jigging one line and deadsticking the second line is working well.   Check with Angle resorts on transport options from Young's Bay.  Call ahead for ice road guidelines.  
    • CigarGuy
      With the drifting, kind of hard to tell for sure, but I'm guessing about a foot and still lightly snowing. Cook end!
    • PSU
      How much snow did you get on Vermilion? 
    • Mike89
      lake here refroze too...  started opening again yesterday with the wet snow and wind...  very little ice left today...
    • Hookmaster
      A friend who has a cabin between Alex and Fergus said the lake he's on refroze. He texted me a pic from March 12th when it was open and one from 23rd when it wasn't. 🤯
    • SkunkedAgain
      I don't think that there has been any ice melt in the past few weeks on Vermilion. Things looked like a record and then Mother Nature swept in again.   I'll give my revised guess of April 21st
    • leech~~
      As I get older it's really not just about sending bullets down range.  Some of it's just the workmanship of the gun and the wow factor. The other two guns I have really wanted which I'll never have now because of their price, is a 8mm Jap Nambu and 9mm German Luger.   Just thought they always looked cool!  
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.