I bought a LSS_2 unit to add to my Gen 1 HDS 5 and 7 and everything worked fine on both units until tonight.
I went to go fishing and when I turned on my HDS7 I get no source on the SS window on the screen. I look at my LSS-2 box and the power light is on, the sonar light blinks, and the unit 1 or 2 light will light up depending on which unit is powered up.
I connected all 3 yellow wires together from the three units so I could control the power to the SS unit with the power buttons on the HDS units.
The LSS-2 units is recognized in the menu as being there, I just don't get any data on the screen, just the words "NO SOURCE" when powered on and water temp, no depth reading and a scale of 5'.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
I have a few days off so hopefully fish 4 days in a row from sunrise to sunset. Likely two or three lakes a day depending on the bite. I won't fish any well known opener lakes until the weekday.
I might have missed a guess, but here are the ones that I noted:
JerkinLips – March 27th, then April 7th
Brianf. – March 28th
Bobberwatcher – April….
MikeG3Boat – April 10th
SkunkedAgain – early April, then April 21st
Definitely a tough year for guesses, as it seemed to be a no-brainer early ice out. Then it got cold and snowed again.
Question
ib_jigged
I bought a LSS_2 unit to add to my Gen 1 HDS 5 and 7 and everything worked fine on both units until tonight.
I went to go fishing and when I turned on my HDS7 I get no source on the SS window on the screen. I look at my LSS-2 box and the power light is on, the sonar light blinks, and the unit 1 or 2 light will light up depending on which unit is powered up.
I connected all 3 yellow wires together from the three units so I could control the power to the SS unit with the power buttons on the HDS units.
The LSS-2 units is recognized in the menu as being there, I just don't get any data on the screen, just the words "NO SOURCE" when powered on and water temp, no depth reading and a scale of 5'.
What could be wrong?
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.