Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
sweept

12v and 2 batteries

5 posts in this topic

How do you connect 2 batteries together and still have 12v not 24v?

Share this post


Link to post
Share on other sites

Positive to positive and negative to negative will keep you at 12v.

Share this post


Link to post
Share on other sites

The batteries must be in the same condition though. I.E. both same age and size. If one is better than the other it will draw from the good one to the worse one thus ruining the better one.

Share this post


Link to post
Share on other sites

This should alow longer run time correct?

Share this post


Link to post
Share on other sites

Running your batteries in parallel will double the run time if the two batteries are like for like. I used to have a perm on Mille Lacs, and ran 4 6v golf cart batteries. both sets in series, to get 12v, then ran those sets in parallel to keep 12v. They would last almost all winter running the lights.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • megofishing
      I am planning on kayaking and fishing the Cannon River this season--between Cannon Falls and Hwy 61. I just want to know if the current is generally swift or lazy, i.e., can I paddle BACK to my entrance spot or do you  need to drift downstream and do the two vehicle thing. I understand it may depend on how low or high the river is at any given time, but in general, when things are 'normal', can you paddle back with little difficulty?
    • maxpower117
      I'll keep it short and simple. The causes of boom and bust on Mille Lacs.    1. Improperly managed slot limits. Too many large fish are allowed in the lake.  2. Netting during spawn. Poor spawning success.    The recent years of high catch rates rates indicate a good 2013 year class but most importantly it is a red flashing light for anyone paying attention. High catch rates are a result of good population AND low or decreasing forage. I put AND in caps because fish won't bite like they have  when they're not hungry.    Cut down that year class class before it's too late. I give it 2 more summers before another crash is inevitable.    Round and round we go, where it stops, nobody knows. 
    • megofishing
      After using most of the brands you've mentioned, I absolutely love Lunkerhunt frogs...real lifelike, and don't seem to fill up with water as much as the others. They also hold up really well--caught some pike and bowfin without them getting destroyed. I have been using the "Croaker" color exclusively, but definitely picking up some other patterns. They also make a popper frog which is great if you want to make a little more noise.
    • megofishing
      I agree with AlwaysFishing--you can come down in line weight for braid if you're just straight up bass fishing. I personally like 30lb if there are a lot of toothy critters around. I use 50-60lb when going after pike and muskie. Have you ever tried fireline for your spinning rod? When jigging, wacky worming, etc., I use 8-12lb fireline exclusively--you can feel EVERYTHING and no stretch is an added bonus. 
    • JBMasterAngler
      Very high expectations. Especially that splake...36 inches would be 2.5 inches longer than what the state record is.