Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Trytti

Where to find Carb part for Tecumseh AV520?

3 posts in this topic

I read a couple posts on adjusting the Carb on a Tecumseh AV520 3HP because mine would not run right. Went out to adjust the Low and high speed adjustment screws and noticed that my high-speed adjustment screw is missing. No wonder it doesn't run right! Does anyone know where I could order a new one? Or would most small engine places have one? Not sure if they are fairly universal or not.

Thanks!

Share this post


Link to post
Share on other sites

That is the model of the engine. There aren't any engine manufactures that make carbs, so when you need a carb part you get the model number and make off the carb.

I think yours would be the Walbro WT-257.

You should be able to get that from a small engine shop or do an on-line search with your carbs make(Walbro) and model(WT-257).

Best bet it to go to Walbro's site and do a look up your carb model. In fact I've done that and your High speed needle is part # 102-3096-1 At that same site you'll find a list of shops to order that part from. Or call a small engine shop and tell them you want part # 102-3096-1 for a Walbro carb.

Share this post


Link to post
Share on other sites

Thanks a bunch! Now maybe I will be able to drill more than one hole per start...

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • eyeguy 54
      you should have taken lessons    
    • leech~~
      I had a battery op Repala a few years ago and sold it to someone else at our campground. Didn't like the way they just zipped through without following the fillets and lost a lot of meat. Really suk's on a partly frozen fish!   Mine came with a case.
    • eyeguy 54
      decided to take the plunge and bought a Rapala Ion rechargeable. anybody have one and what do you use for a case?
    • Wanderer
      Nice review and nice looking work!
    • Borch
      I haven't but I'very heard that there have different versions of the clam adapter and Milwaukee has made some changes as well in their design to deal with higher torque ratings.  Give Clam a call with you drill mod4l number and I'm sure they'll be able to help you out with which is the correct for your drill.