Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
tjsdad38

Lowrance X-67C issue........ HELP!!!!!

1 post in this topic

I have an X67 on my dash and one up front. The one up front stopped working. Both units work fine on the dash, so I took the plate off up front figuring I'd blown a fuse...... the fuse was fine, then I figured it was the power cord/transducer. I put a meter to test if I had juice and I did, but I still changed the power cord/transducer and still have power like I did, but the front mount still does not work for either unit and again both work fine on the dash. The meter registers each mounting place the same. I'm baffled, so here I am asking for the experts here for advice. Please Help!!!!!!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • bemidjibasser
      What happened to all of the old posts/pages? 
    • SkunkedAgain
      Thanks Cliff. It looks like I'll bring tall boots, ice crampons, and snowshoes for my walk across the lake on Friday! Who knows what I'll encounter
    • titelines
      I fished north of Two Harbors on Sunday and it was a mess.  The plowed areas had a good 4-5" of standing water, the rest was slop and slush about 1/2 way up to my knee. There was plenty of ice, and there were 4-5 pickups out there, but I scouted it out with the ATV and elected to walk to my spot rather than risk getting stuck in the muck.  This was of course before the rain Monday, so I can only imagine what it's like now.  
    • Chicagoanisamissindavee
      Del,   You know what they say about opinions and a certain part of the anatomy don't you. That said, you've made your point but it's now time that you step out for some fresh air and give this rant of yours a break.     Good luck to the Landing's new owners. Restaurants are a tough gig anywhere and I sincerely wish you the best and hope you'll succeed.   John
    • Borch
      Although down riggers aren't required, they sure are nice.  I'very really become a fan of copper lately.  The newer stuff is easier to work with and has caught more fish for me over lead core over on Lake Michigan.      I agree that unless you're using the suffix lead core the 47s don't leave a lot if room for backing.  Definitely use braid for backing.  I like to splice 20 ft of 30 lb mono between the core and backing to clip boards to.   I do the drag upgrades too.  When you get the diameter down the drags aren't as forgiving.